Quick Way to Setup Mikrotik with Proxy Enabled Using Terminal (Command Line)

5 step to configure the mikrotik

1. IP Address
2. Gateway
3. DNS
4. NAT
5. Proxy + transparent rules

Step 1
[admin@MikroTik] > ip address add interface=ether1 address=”your public ip” \
disabled=no
[admin@MikroTik] > ip address add interface=ether2 address=”your lan ip” \
disabled=no

Step 2
[admin@MikroTik] > ip route add gateway=”your gateway ip” disabled=no

Step 3
[admin@MikroTik] > ip dns set primary-dns=”your isp primary dns” \
secondary-dns=”your isp secondary dns” \
allow-remote-requests=yes

Step 4
[admin@MikroTik] > ip firewall nat add chain=srcnat out-interface=ether1 \
action=masquerade disabled=no

Step 5
[admin@MikroTik] > ip web-proxy set port=8080 hostname=host.yourdomain.com \
transparent-proxy=yes \
cache-administrator=support@yourdomain.com enabled=yes
[admin@MikroTik] > ip firewall nat add chain=dstnat protocol=tcp dst-port=80 \
action=redirect to-ports=8080 disabled=no \
comment=”transparent proxy”
[admin@MikroTik] > ip firewall nat add chain=dstnat protocol=tcp dst-port=3128 \
action=redirect to-ports=8080 disabled=no
[admin@MikroTik] > ip firewall nat add chain=dstnat protocol=tcp dst-port=8080 \
action=redirect to-ports=8080 disabled=no